NEW PLAYSTATION 5 PS5 Dualsense PROGRAMMABLE Remap Board Install Remap Buttons

Description

PS5 Dualsense Controller Custom Remap Board - Programmable
In order to prevent ghost presses please turn off the
Adaptive
trigger function for Rapid fire and Programmable remaps in the PS5 sesttings.
Requires soldering.
Tutorial can be found at
https://www.youtube.com/watch?v=5TFProBnWIg&t=838s
If you do not think you cna do this install, please buy a already modded controller.
DIY Boards, any mistakes are on you, so please be confident you can do it.
BEST OFFER BUTTON IS FOR 4 or more boards at once...
If you are buying 1-3 boards they are full price no exceptions.
The Remappable Dualsense Button Chip so that means you can re-map any button on the controller.
I am the only
one on eBay who offers this.
NO ONE offers this feature and does not offer DualSense Controllers.
We have a re-mappable Dualsense
Controller available!
This board will allow you to make your own Programmable Dualsense Controller.
A little about the Remapping feature.  Buttons that can be remapped are as follows:
X,O,TRI,SQ, Left Thumbstick Click, Right Thumbstick Click, Right Bumper (R1), Left Bumper (L1), Right Trigger (R2), Left Trigger (L2)
Dpad - UP, down, left, right
What more can you ask for in a competition/Tournament ready controller!
These are one of a kind and no one else has these features available
at this time.  You Can be the very FIRST!!!
So, How you use this remap feature?
HOLD R1 R2, L1 L2 till the speaker mute turns RED
The led will turn on indicating it is in program mode.
Press and hold the button on the back of the controller you want to remap and tap the button you want to map it to.
Let go of the remap button on the back
(you should get a Red blink)
Do this a second time for the other remap.
Press UP on the Dpad to save.
The buttons are remapped!
That's it!
For example,  you wanted to Knife in COD. You want to remap that to one of the 2 buttons on the back. Say button 2.
HOLD R1 R2, L1 L2 till the speaker mute turns RED
Press and hold Button 2 on the back and tap the Right stick analog.
Let go of button 2 on the back (you get a red blink)
Press up on dpad- light goes off and it is DONE
What is the difference between the remap board and this higher priced board?
The board only allows you to map one button to one button on the controller.
Once you map it you are stuck with it unless you open the controller
desolder the old mapping and solder it to a new mapping.
This board is programmable - you can do 1-4 mappings on your controller.
The picture on the auction shows 2 re mappings on the back of a DS controller.
You can, AT WILL, Change the value of the button press you installed but just
changing it with a simple press and hold programming mode.
PLAYSTATION 5 - DUALsense - Instructions All explained here and there is a whole Tutorial Video
https://www.youtube.com/watch?v=5TFProBnWIg&t=838s
Tested by Pro Gamer's.
Precisely Calibrated for Tournament Action.
100% compatible with ALL GAMES!!!! Especially COD and more.
Remaps are for gamers who do not want to take their hand off the analogs while playing and what buttons for their grip fingers/hands to press.
DISCLAIMER: Please make sure you use a LOW wattage, Low Temp Soldering Iron for small PCB electronics.
A narrow tip is recommended (1/64th or 1/32nd size tip)
Also make sure to use Low temperature melting solder.
If you use an iron TOO HOT or TOO Powerful an Iron you can melt the Plastic Flex and ruin the board.
If you ruin the board we will not replace or refund you, you take full responsibility for the board once your Soldering iron touches it.
I just added this section on 1/19/2021
This is 10 pics that show a simple install of the programmable remap if the video is too hard for you to follow.